This guide of where to donwload GM Tech2 TIS2000 software and how to install it.Free version all from Customer support,Big thanks!
TIS2000 free Software
http://www.mediafire.com/file/bc92by7ao7fp1la/GM+2000NAO.7z
Tis2000 Dongle Crack
http://rg.to/file/a081c4c028aa1fb80ea98e15a540b9a9/TIS2000_Dongle_Crack.7z.html
Tested version:
How to install TIS2000 software:
Customer solutions.. here you go…try on your own risk
TIS2000 Window XP:
* Installed a fresh copy of Windows XP SP3. I didn’t bother with updating anything else as far as security updates to Windows or install a virus scan because this computer will never be connected to the Internet or used for anything else.2. Installed ALL the required drivers until there were no more yellow check marks in Device Manager. I failed to do this at first and caused a lot of headaches later, including a BSOD during software installation.3. If you’re using a USB to serial adapter, plug it in now and set it up. Go into Device Manager and make note of the COM port used by the adapter.3. Install the Tis2000 software from the CD included with the Tech2. During the install, it will ask you to specify the COM port. If you have a serial port on the computer, it’s probably COM 1 or use the one from the USB adapter.4. Before you can use Tis2000 with your Tech2, you have to make it “think” that there is a dongle connected that authorizes it. You can download the crack below. Follow the read me file for instructions on how to use it.
* That’s it.
TIS2000 Windows 8 32 bit:
However, if you have a 32-bit copy of Windows 8 installed (I don’t wanna know why you do), running 16-bit applications are disabled by default. You can enable it by going to Control Panel and clicking on 16-bit Application Support then clicking Enable.
TIS2000 Windows 7 with XP Virtual PC:
For those of you with genuine copies of Windows 7 Professional, Enterprise, or Ultimate with a multi-core processor (who doesn’t run Win7 on a multi-core these days); these versions of Windows 7 allow you to use Windows Virtual PC, which lets you virtually run Windows XP Pro without a disc or OS installation. You need to install Windows XP Mode and Windows Virtual PC in order to use it. Before you can download these updates, M$ makes you run a little .exe that checks if your OS install is legitimate. Anyway, after you get that all installed and XP Mode is booted, you can copy the OP’s cracked TIS2000.zip over to the WinXP Desktop and follow the README.txt inside to install it. Here is a link with the cracked TIS2000http://www.obd2eshop.com/wholesale/tis2000-cd-and-usb-key-for-gm-tech2-gm-car-model-software.html…I have tested this on my desktop running Windows 7 Ultimate 64-bit and the cracked copy of TIS2000 the OP posted installed and ran with no problems. Instructions for Win7 XP Pro virtualization mode here: http://windows.microsoft.com/en-us/w…e-in-windows-7
TIS2000 software Window 64 bit or 32 bit:
64-bit versions of Windows contain backwards compatibility with 32-bit applications, but not with 16-bit applications. And 32-bit versions of Windows are backwards compatible with 16-bit applications. The problem with installing TIS2000 on newer machines is that, while the TIS2000 program itself is 32-bit, the installer and drivers are 16-bit. Therefore, you are able to install TIS2000 natively on ANY 32-bit Windows system. This will just work, without having to run anything in compatibility mode.
Now to the most common problem:
If you are running a 64-bit version of Windows XP, Windows Vista, Windows 7 Home Premium or lower, or ALL versions of Windows 8 and 8.1, I guess any version of Mac or Linux too, you have a couple of more involved and more risky options…
You can obtain a copy of Windows 2000 or XP Pro 32-bit. It includes two programs for making a bootable CD or USB drive. Pop the bootable device you created into your laptop, reboot to the device, then install that operating system onto a seperate partition of your hard drive, or a different hdd altogether. Or you can install Virtualbox (free software), and run the cracked Windows copy via a virtual machine… The method I took to test this was to create a separate partition on my ssd and install it there. When the computer reboots, it will ask you what OS you would like to run. Select Windows XP Pro, then continue installing TIS2000 software. If you’re gonna be writing to the main drive on your computer, I suggest first creating a bootable USB with Clonezilla on it and creating a drive backup with that http://clonezilla.org/downloads.php …This allows you to make a complete backup image of your hard drive, and allows you to flash it back to that drive at any time. A good thing to have around anyway.
VXDIAG VCX NANO GM + TIS2000:
IT works!! ok for anyone trying to use the VXDIAG GM nano with SPS this is what you need to do (order is important):
*** please note you cannot use the VM that the VXDIAG package comes with (GDS2 VM). It’s configured in such a way it won’t work with the dongle crack and caused me a lot of head scratching to find this out.
* Create awindowsXP 32bit VM using VMWare Player
* Make sure you add an LPT port (set to auto, not connected on
startup). It doesn’t matter if your actual PC has an LPT port or not
this is needed for the dongle crack later.
* Install VMWare tools for your VM
* After you have the windows VM up and running install the BOSH MDI
drivers found here:
http://www.boschdiagnostics.com/pro/soft…-and-mdi-2(the MDI drivers on
the driver disk andvxmanagerinstaller wouldn’t install on myxp32bit VM
but the one from bosh does).
* From the driver disk or from allscanner.com install the VXDIAG MDI
package with pass thru driver (VXDIAG MDI manager or VXDIAG Manager
* (files / instructionsin the updated.txt you may need to click the link more than once if you get an error when downloading)
* Mount the tis_data_1.iso in your VM (use the virtual cdrom in vmware
player and attach to iso file) this will start the auto install of the
TIS2000 2007.3 software)
* All options can be installed using the default selectionshowevermake
sure you check the install checkbox above the parallel security device
on the one screen.
* After installation is complete you can extract the TIS2000DongleCrack.rar and copy the folder to the desktop of your VM
* Go into the TIS2000DongleCrack folder locate the drivers folder and
open it, run the DDINST32.EXE (if you get a registry error you didn’t
install an LPT port in your VM), select Express and it should install
the files then click ok / Exit to close.
* Go back to the main TIS2000DongleCrack folder and copy
SCAControlUI.exe and Id.dll to c:\Program Files\cosids\bin\ (it will
prompt to replace id.dll select yes).
* Go back to the main TIS2000DongleCrack folder into the Dongle folder
and copy the 2 files in there to c:\windows\system32\ (the dongle crack
is now installed)
* Now mount the tis_data_2.iso in your VM (use the virtual cdrom in
vmware player and attach to iso file) and open TIS2000 (double click the
icon on your desktop) when TIS opens it will ask you if you want to
upgrade click yes.
* After the upgrade completes mount the GM-NAO-TIS200-3_2008.iso in
your VM (use the virtual cdrom in vmwareplayer and attach to iso file)
and open TIS2000 ( double click the icon on your desktop) when TIS opens
it will ask you if you want to upgrade click yes.
* After the upgrade completes you have successfully installed TIS2000
2008.3 and the Dongle crack, now we need to configure TIS to use the
VXDIAG GM nano
* Open TIS2000 from the icon on your desktop, select Configuration menu from the top and select IO Management.
* Click the Driver button, click the Browse button, locate the
j2534.dll file in the window and click open (installs the J2534Pass Thru
Driver)
* Now click the Add button (in IO management) enter exacly “Generic
Pass Thru” in Logical Name and select “J2534Pass Thru Driver” in the
Driver drop down, click OK.
* Select Generic Pass Thru in the list and click Properties, in the
Device Name drop down select VXDIAG, (ALLScanner) and click ok then
click close to close IO Management.
Now TIS2000 software is installed and configured all you have to do is connect your VXDIAG device to the PC / VM. To do this first use a usb and connect it to the PC then in the VMWare player menu go in removable devices and connect the Future Devices USB to serial converter. At this step my windows install didn’t have the basic usb to serial drivers so I connected the VM to the network (if not connected use the VMWare player menu to connect the network) and windows downloaded them from the net and installed the device as com3. you are now good to go.
At this point you can now click on SPS in TIS2000 select Generic Pass Thru as your device and your good to program!!
Satisfied, VXDIAG VCX NANO GM device works as a clone to the GM MDI.
Credits to wizzardsl writing for the how-to’s for us.
