Chrysler 200 Spare Key Add with WiTech or AlfaOBD

Have a 2011 Chrysler 200 S used with one of the original keys, I want to add one more spare key, I need to go to the dealer to have the key list reset? Because I don’t have 2 original keys.

3 options of 2011 Chrysler 200 S key add:

Unfortunately this is true, you need 2 working keys to program additional keys. A dealer is able to able to add keys using the WiTech diagnostic tool. This also requires a PIN which the dealer is able to get through the parts department. If you buy the blank key through the dealer they may program it for you for the price of the key ($150 or so dollars).

PS:

Chrysler wiTech MicroPod 2 can also program 2005 Chrysler 200 when All Keys Lost, here is the operation guide:

https://www.obd2tool.com/blog/2021/09/16/how-to-use-witech-micropod-2-to-program-2005-chrysler-200-all-keys-lost/

Insert the new key you want to program and turn the ignition cylinder to ON position. Currently Chryslers MicroPOD II is the only solution for all keys lost because its the only tool that will wake the BUS to begin the programming procedure for new keys. Lost key replaced on site using MVP Pro to pull pin and program a new smart key.

Another option is to purchase the appcar software beta which is able to pull the PIN and program additional keys. It will cost $50 for the software and $40 for the obd dongle/cable to connect to the car obd port and you will need to buy a blank key. Note, do not buy a refurbished key, new only, as the key is programmed to the wcm (wireless key module) of the car and cannot be reused/reprogrammed.

Appcar will work on all 200’s as noted on their website. The appcar software can retrieve the PIN so there no need to go to a dealer. It is quite easy to pull the PIN and immediately program the new keyfob.
Note that AlfaOBD will still require the purchase of a separate OBD dongle.

Another option is I have used alfaOBD for such. This should work on the car listed by the op also. Still will need pin from dealer, and yes new key. AlfaOBD is $50 and works with windows or android. I believe it works on all FCA, stelantis, etc from 2009 and up. At least for now. Not sure of course what will change with new ownership.

Alright, all of three WiTech diagnostic tool, appcar and alfaobd have their strengths and weaknesses.

As noted, it is your choice on how to proceed.

Autel IM508 Program 2018 Dodge RAM 3500 Key Fob via 12+8 Bypass Cable

 

Chrysler vehicles 2018- now require the 12+8 cable to clear DTCs and to add keys.  Here we successfully added a new key fob with Autel IM508 XP400 and autel 12+8 cable for Dodge RAM 3500 year 2018 with secure gateway module (SGM). Program key in auto mode.
4 buttons remote key fob

Dodge Ram 1500 2018 Key Fob

2018 Dodge RAM3500 SGM location:
Need to remove the stereo in order to get to the secure gateway module.  Remove everything and you will see.

Go to Dodge 3500 key programming menu, IM508 asks to hook up a Chrysler FCA 12+8 adapter

We’ve got that connected right there behind the stereo

Turn the ignition off and turn on the emergency flashers

Read security password
Select Keyless System (CAN) – Key Learning – Key Learning

Turn the ignition off and turn on the emergency flashers

Put smart be to be learned in vehicle and take other keys out of the vehicle
Auto fill-in 4-digit pin to access

Press LOCK or UNLOCK button on the remote control

Key learning successful
Put everything back
And test remote control and new key.

Done.

How to Solve forget your XTOOL device screen password

If forget the XTOOL Device Screen Password ,how do we solve it ?

When we forgot or lost the XTOOL Device screen password,PIN, pls don’t mess trail input the password,3-5 attempts wrong the machine will be locked .we need the factory reset to unlock the device .

what should i do ?

First : pls purchase the XTOOL flash file system service .
Second : Offer the device SN and contact  customer service to arrange the XTOOL Tech to help flash the device when you are free l.
Third : connect the XTOOL tablet to computer via USB Cable
Forth : Open the Teamviewer on PC and tell the ID and Password .

I hope that could help you .In the future ,any questions .pls feel free contact with us .

How to Sovle VXDIAG Benz C6 No WiFi Connection on Windows 10

 he problem goes like this:

” My Vxdiag Benz C6 connects no problem via LAN cable. But it failed to connect via WiFi and does not allow me to disable Flight mode either. Windows 10 cannot find Wifi devices on this PC.  Any idea how to fix it?”

Solution:

The problem was caused by missing a WiFi driver.

Our Xentry HDD does come with the Driver Genius. Sometimes it is not compatible with your operating system due to various configurations.

Connect network via LAN cable. Send Teamviewer ID and password to us.

Our engineer will help update the WiFi driver.

WiFi wireless connection is working fine now.

How to Remote Folding Mirrors via VCDS for Seat Leon

 

This short post will show you guide on how to set remote folding mirrors function by VCDS for Seat Lean. More function of VCDS, please refer to VCDS CASES.

Procedures:

Connect VCDS to Seat Leon OBD port and running it.

Click “Select” to select control module

Select “42-Door Elect,Driver”

Select “Coding-07”

Select “Coding Helper”

Select “Bit 4 Folding Mirrors installed”

Click “Do It!”

Click “OK”

Go back and select “52-Door Elect Pass.”

Select “Coding-07”

Click “Coding Helper”

Select “Bit 4 Folding Mirrors installed”

Click “Do It!”

Coding accepted, function is ready.

If you want to know more about Seat, please visit here: Seat Trouble Repair.

How to Clear LED Errors via VCDS for VW

 

After mounting the LED bulbs on low-beam, high-beam, position lights and fog lights, there is a permanent fault on the instrument dashboard. This is why this coding using the VCDS helps to remove this fault and if one of the bulbs is defective it will be reported.

Steps:

Connect VCDS to VW OBD port, and running it.

Click “Select” to select control module

Select “09-Cent. Elect.”

Select “Fault Codes-02”

Default fog- Light and High beam, low beam

Click “Clear Codes -05”

Go back and click “Coding -07”

Click “Long Coding Helper”

Remove tick from Bit 2

Exit, then click “Do It!”

Coding accepted.

More cases about VW, please refer to VW Trouble Repair.