How to solve Nissan Consult 3 Plus V75 software does not support this PC

 

Error description: Installed Consult-III Plus V75 software on win7, got error ” CONSULT-III plus software is not supported by this computer. Check the computer and install CONSULT-III plus software on a suitable computer. Touch ‘OK * to finish the installation.” I also installed on Win 10 Pro, Win 7 Enterprise, Win Xp Sp2 etc, I got the same error message.

Engineer replied:

You have to put the following file into the software before installing consult-iii plus v75

https://mega.nz/#!RVxWkSDb!XbsvWRI90YScFLdq3AZUGJHDhu5Iq_rvpJ9VE-rHfFM

Simple steps:

1. Open “tempNissan” -> “C3P_V75.15.00”

2. Copy “Setup.inx” on the desktop, paste it into “C3P_V75.15.00” to replace the original one.

Diagnose Nissan 2007 x-trail 2.0 dci with Consult III or Multidiag Actia J2534

Car model and year: Nissan 2007 x-trail 2.0 dci

Purpose:
I especially try to diagnose effectively, clear the defects, possibly handle this damn Fap ….
I am looking for a tool do, for example, resets after “organ” change like egr valves on Nissan. Is it able to perform tests?
Tool to consider:
Multidiag Actia J2534
Consult-3 Plus could see on www.obd2tool.com
Advice: if you just want to make an xtrail take the consult III.
Comes one question: on this OBD2TOOL site, we find two interfaces consult one at €118 and the other $225 without I can distinguish the differences in features. Is there a big difference between the two?
Fact:
yes it will be much more effective on Nissan than a multi-brand!
already between the one at €118 and €225 there is a difference is that the most expensive has Bluetooth and not the other. the most expensive comes with a suitcase the other is a carton, after there may be the quality of the components used which is different!
but otherwise the 2 will do the same thing except that the $118 has to be connected to the pc by a USB cord
So, you are supposed to go to one of these two interfaces Nissan consult III.

How to Enable Immo and Programming in Consult 3 plus

Here is how to use Nissan Consult 3 Plus to do Immo and programming without spending out on the smart card.
find the consult diagnostictool.ini file
open with notepad
copy and paste this at the bottom
——————————————————–
[mode]
debug_mode=TRUE
debug_mode_vehicle-battery=TRUE
[vehicles]
tab_index=0
———————————————————
ALSO, MAKE SURE ACCESS_MODE IS SET TO 1 IN THIS FILE
NOW SAVE AND REOPEN CONSULT…VOILA!!!!!
Here is the location of fille DIAGNOSTICTOOL.INI:
C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting\DiagnosticTool.ini
Please just try this at your own risk, I am not responsible the result if you have any question.
I share this because you can do this without spending money to buy the security card.
And this solution is for Car Scanner consult 3 plus.
If you can’t solve this problem, better buy consult 3 plus+ security card for IMMO AND PROGRAMMING.

Compared to the old Consult iii, 2016 Consult iii plus highlights

Obd2tool.com engineers have tested the new Nissan Consult 3 iii plus v61.10 supports ECU, TCM, ABS programming with programming data Pplus V51.IF, no need extra pay for the immobiliser cards for ALL nissan since 1996 to 2016.

Compared to the old Consult iii, 2016 Consult 3 Plus highlights:
I- directly do offline ECU programming without extra cards for programming
II- support all Nissan and Infiniti from 1996 to 2016, while Consult iii only for cars till 2011
III- cover ALL functions of Consult ii and Consult iii:

1.Swift diagnosis and swift repairs through automated operations
The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.

2.Automated Self-Diagnostics
The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either  inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

3.Capable of handling multiple complex defects
The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

4.Enhanced data management with improved laptop PC
New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

5.Map data update function for hard-disk navigation system
Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future Auto Scanner Tools.
(1) CONSULT:Computerized On-Board System Universal Tester.
CONSULT introduced in 1989, CONSULT-II introduced in 1999. CONSULT-III is 3rd generation model.
(2) Communication distance: radius of 5m approx.