Update: got this one done. Have programmed a new key to 2018 Chevrolet Cavalier
Ended up reading BCM data and sending to someone in mexico a friend hooked me up with and got the 14 digit pin code.
Uses:4d60, i.d. 70 80 bit.
Car: 2018 Chevrolet Cavalier
This one is made in china, GM/ SAIC
Key programming using Lonsdor K518ISE:
Send VIN to obtain vercode
The BCM
Diagram
Lonsdor K518ise is gonna to add a new key
Immobilization – CHEVROLET – China – Cavalier – Immobilizer
Enter 14bit PIN code
Configuring the system
Key count: 0
That is, there is no keys available for this car
Insert the key (to be programmed) and switch ignition ON until the
two flashing lights (hazard lights) flash, wait up to 10 seconds. If not
flash, press [OK] to continue, then press [OK] to continue
Key count: 1
Programming complete!
Test the new key. It worked
Job’s done!
This blog offer you all kinds of car diagnostic tools at cheap price,car diagnostic tools are hot sale at shop www.obd2tool.com.
Thursday, February 20, 2020
2018 Chevrolet Cavalier New Key Done with Lonsdor K518ise
Lonsdor K518ise – All New and Old Ford Compatible
Lonsdor K518ISE doesn’t
work with old Ford cars, and it doesn’t support j1850, j2534
communication protocols. For all Ford vehicles <2009, 2010 you can
use Lonsdor. But for older Ford, you should use SBB or something like that
Lonsdor K518ise FORD Car List:
Lonsdor K518ise FORD Car List:
Series | Origin | Year | Fuel Type | Function |
New Mondeo | Other | Other | Other | Key Programming |
New Mondeo | Other | Other | Other | Smart Key Programming |
Escort | Other | Other | Other | Key Programming |
New Edge | Other | 15- | Other | Smart Key Programming |
Mustang | Other | Other | Other | Smart Key Programming |
Kuga | USA | 05-07 | Other | Key Programming |
Raptor F350 | Other | Other | Other | Key Programming |
Transit | Other | Other | Other | Key Programming |
Mondeo Wins | Other | Other | Other | Smart Key Programming |
Mondeo Wins | Other | 2012 | Other | Key Programming |
Mondeo Wins | Other | 2011 | Other | Key Programming |
Focus | Other | 2004-2008 | Other | Key Programming |
Focus | Other | 2011-2013 | Other | Key Programming |
Kuga | Other | Other | Other | Key Programming |
Ecosport | Other | Other | Other | Key Programming |
Fiesta | Other | Other | Other | Key Programming |
Focus | Other | 2009-2011 | Other | Key Programming |
Mondeo | Other | Other | Other | Key Programming |
Ecosport | Other | Other | Other | Smart Key Programming |
Fiesta | Other | Other | Other | Smart Key Programming |
Focus | Other | 14- | Other | Key Programming |
Exploror | Other | 11- | Other | Key Programming |
Classic Focus | Other | Other | Type2 | Key Programming |
Kuga | Other | Other | Other | Smart Key Programming |
New Edge | Other | -15 | Other | Smart Key Programming |
Raptor F150 | Other | 2011-2014 | Other | Key Programming |
Raptor F150 | Other | 2009-2010 | Other | Key Programming |
Raptor F250 | Other | 2009-2010 | Other | Key Programming |
Everest | Other | Other | Other | Smart Key Programming |
Classic Focus | Other | Other | Type1 | Key Programming |
Exploror | Other | 15- | Other | Smart Key Programming |
Taurus | Other | 15- | Other | Smart Key Programming |
Everest | Other | Other | Other | Key Programming |
Friday, February 7, 2020
The best tools to program VAG 4th 5th IMMO
If you are a locksmith and looking for best tools to program key on
VW Audi 4th 5th IMMO, then you have to look at the below top 4 key
programmers.
1. XTOOL X-100 PAD2 with KC100 Adapter
2. OBDSTAR RFID Code Reader Adapter
3. JMD Handy Baby support only 4th IMMO programming
4. Xhorse VVDI2 +4th 5th Immo authorization service and Xhorse VVDI2+ 5th IMMO authorization service
Top 1: X-100 PAD2 full package with KC100 adapter OK to program VAG 4TH 5TH IMMO
XTOOL X100 PAD2 full package with KC100 adapter
Matched Dashboard Type for 4th ,5th immobilizer of VW/Audi/Seat/Skoda:
CDC24C32,NEC24C32,9S12,NEC24C64,NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.
Here 7 pictures on How to use KC100 adapter?
Top 2: OBDSTAR RFID Code Reader Adapter
OBDSTAR RFID Adapter works together with any of OBDSTAR machines i.e Key Master DP/ X300 DP/ DP Plus/ Key Master/ X300 Pro3/ X100 Pro. Then to work on:
* CDC+24C32 Types
* NEC+24C32 Types
* 2013 Johnson Types;
* Motorola 9S12XHZ512 Types;
* NEC+24C64 Color Screen- Type 1
* NEC+24C64 Color Screen- Type 2
* NEC+24C64 White Screen Type
* NEC+24C64(VDO -12)Type
* NEC+95320 Type
* NEC+35XX Type
* Magotan/ CC Type
* Q7/A6L(C6)9S12DT(G)128 Type
* Q7/A6L(C6)9S12DT(G)256 Type
* Lifan Marvell models are added, which includes Add/Clear Keys, Program/Delete ESCL functions.
* Jiangling MU-X models are added as key programming and key clearing
Top 3: Handy Baby key programmer + JMD Assistant Handy baby OBD Adapter = 4th IMMO programming.
To program VAG 4th IMMO, you need an extra JMD Assistant Handy baby OBD Adapter, JMD Assistant is an OBD model to help Handy Baby to read out data from Volkswagen cars, and it needs your Handy Baby upgrade to at least version 8.0.0.
JMD Assistant reads data from Volkswagen cars only and won ‘t write any data to cars, even in all key lost , so it won ‘t be locked when the car connect to the server in 4S. Handy Baby reads data from JMD Assistant with RF, and it no needs any cables or computer during your work.
Top 4: Xhorse VVDI2 VAG key programmer
Both VAG 4th 5th Immo OK
1)vvdi2 vw 4th immo authorization:
– VAG with 4th immobilizer system
VW/Audi/Skoda/Seat/Porsche/Bentley vehicles all have 4th immobilizer car.
For Immo status, go to “Key Learn ->Key Learn”
–Passat /CC with 4th immobilizer system
Passat/CC has 2 transponder types: one is MEGAMOS 48, another one is HITAG2 (46 Transponder). Before make key you must select transponder type 48 or 46. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method.
–Touareg/Phaeton/A8/Cayenne/Bentley with 4th immobilizer system
This type use HITAG2 (46 Transponder).
–Audi A6/Q7/Allroad with 4th immobilizer system
This type use MEGAMOS 8E transponder. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method
2) 5th immobilizer system immo authorization:
This type use VAG immo5 transponder or OEM key support following cars: A4 (2009-), A5, Q5, A6 (2012-), A7, A8(2011-), Touareg (2011-) to make a dealer or learn keys.
Xhorse VVDI2 VAG support the 4th and 5th immobilizer systems
Xhorse VVDI2 +4th 5th Immo authorization service
Xhorse VVDI2+ 5th IMMO authorization service
All here.
Thanks
1. XTOOL X-100 PAD2 with KC100 Adapter
2. OBDSTAR RFID Code Reader Adapter
3. JMD Handy Baby support only 4th IMMO programming
4. Xhorse VVDI2 +4th 5th Immo authorization service and Xhorse VVDI2+ 5th IMMO authorization service
Top 1: X-100 PAD2 full package with KC100 adapter OK to program VAG 4TH 5TH IMMO
XTOOL X100 PAD2 full package with KC100 adapter
Matched Dashboard Type for 4th ,5th immobilizer of VW/Audi/Seat/Skoda:
CDC24C32,NEC24C32,9S12,NEC24C64,NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.
Here 7 pictures on How to use KC100 adapter?
Top 2: OBDSTAR RFID Code Reader Adapter
OBDSTAR RFID Adapter works together with any of OBDSTAR machines i.e Key Master DP/ X300 DP/ DP Plus/ Key Master/ X300 Pro3/ X100 Pro. Then to work on:
* CDC+24C32 Types
* NEC+24C32 Types
* 2013 Johnson Types;
* Motorola 9S12XHZ512 Types;
* NEC+24C64 Color Screen- Type 1
* NEC+24C64 Color Screen- Type 2
* NEC+24C64 White Screen Type
* NEC+24C64(VDO -12)Type
* NEC+95320 Type
* NEC+35XX Type
* Magotan/ CC Type
* Q7/A6L(C6)9S12DT(G)128 Type
* Q7/A6L(C6)9S12DT(G)256 Type
* Lifan Marvell models are added, which includes Add/Clear Keys, Program/Delete ESCL functions.
* Jiangling MU-X models are added as key programming and key clearing
Top 3: Handy Baby key programmer + JMD Assistant Handy baby OBD Adapter = 4th IMMO programming.
To program VAG 4th IMMO, you need an extra JMD Assistant Handy baby OBD Adapter, JMD Assistant is an OBD model to help Handy Baby to read out data from Volkswagen cars, and it needs your Handy Baby upgrade to at least version 8.0.0.
JMD Assistant reads data from Volkswagen cars only and won ‘t write any data to cars, even in all key lost , so it won ‘t be locked when the car connect to the server in 4S. Handy Baby reads data from JMD Assistant with RF, and it no needs any cables or computer during your work.
Top 4: Xhorse VVDI2 VAG key programmer
Both VAG 4th 5th Immo OK
1)vvdi2 vw 4th immo authorization:
– VAG with 4th immobilizer system
VW/Audi/Skoda/Seat/Porsche/Bentley vehicles all have 4th immobilizer car.
For Immo status, go to “Key Learn ->Key Learn”
–Passat /CC with 4th immobilizer system
Passat/CC has 2 transponder types: one is MEGAMOS 48, another one is HITAG2 (46 Transponder). Before make key you must select transponder type 48 or 46. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method.
–Touareg/Phaeton/A8/Cayenne/Bentley with 4th immobilizer system
This type use HITAG2 (46 Transponder).
–Audi A6/Q7/Allroad with 4th immobilizer system
This type use MEGAMOS 8E transponder. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method
2) 5th immobilizer system immo authorization:
This type use VAG immo5 transponder or OEM key support following cars: A4 (2009-), A5, Q5, A6 (2012-), A7, A8(2011-), Touareg (2011-) to make a dealer or learn keys.
Xhorse VVDI2 VAG support the 4th and 5th immobilizer systems
Xhorse VVDI2 +4th 5th Immo authorization service
Xhorse VVDI2+ 5th IMMO authorization service
All here.
Thanks
How to DIY fix XTOOL X100 Pad 2 battery drain fast problem
Some users recently feedback XTOOL X100 Pad 2 all OK, just battery
drain too fast when using even after fully charged. So here is a DIY
solution for you to fix X-100 PAD2 battery problem.
Tool you need:
Static bracelet (Please wear the static bracelet before the operation)
Hot air gun (Set the temperature to 350±10℃)
XTOOL Scanner X100 Pad 2 battery drain fast solution (3 steps)
Step 1: Find the position as picture to start
Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.
Step 2: Find the position as picture to start
Disassemble the Q14 transistor.
Step 3: Find the position as picture to start
Replace the C123 capacitor with a 3.3K%5 0402 resistor.
That’s all XTOOL X100 Pad 2 battery drain fast solution steps!
Follow it and the problem should be solved!
Tool you need:
Static bracelet (Please wear the static bracelet before the operation)
Hot air gun (Set the temperature to 350±10℃)
XTOOL Scanner X100 Pad 2 battery drain fast solution (3 steps)
Step 1: Find the position as picture to start
Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.
Step 2: Find the position as picture to start
Disassemble the Q14 transistor.
Step 3: Find the position as picture to start
Replace the C123 capacitor with a 3.3K%5 0402 resistor.
That’s all XTOOL X100 Pad 2 battery drain fast solution steps!
Follow it and the problem should be solved!
Subscribe to:
Posts (Atom)