XDOS DAS Call WIS NET F6 (HELP)- WIS is not available Solution

Problem:
Update VI. Fix “WIS is not available on this system” error when click F6 in DAS ver 1.1 for 2019-09.
Purpose:
if you click F6 in DAS then you get “WIS is not available on this system” error, you have to apply this fix to get the help documents in wis.
As there is an known obstacle on installing wis standalone on Xentry, you can use wis net as replacement of it. But when you click F6, you will get this famous sentence “WIS is not available on this system”



Notes:
1. I change the “s” file only but to sustain compatibility i include the cnt too.
2. It should be able to be used for DAS call WIS standalone in Xenty XP, but i have not tested it yet. i don’t have the Xentry xp system right now.
3. You have to run wis net before run xentry.
4. DIY, No Support, All Risks are yours, it is for education only.
Compatibility: ALL XDOS version, Xentry xp (not check yet).
Vehicle: passenger car, smart, transp/van.
For passenger car (pkw):

extract to
xdos: (x32/x64)
c:\program files (xxx)\mercedes-benz\das\trees\pkw\programm\wis_link
xp:
f:\programme\das\trees\pkw\programm\wis_link
Don’t forget to backup the original files please.
For smart:

extract to
xdos: (x32/x64)
c:\program files (xxx)\mercedes-benz\das\trees\smart\SpecialF\WIS
xp:
f:\programme\das\trees\smart\SpecialF\WIS
For transp/van
extract to
xdos: (x32/x64)
c:\program files (xxx)\mercedes-benz\das\trees\transp\037\programm\wis_link
c:\program files (xxx)\mercedes-benz\das\trees\transp\157\programm\wis_link
c:\program files (xxx)\mercedes-benz\das\trees\transp\960\programm\
c:\program files (xxx)\mercedes-benz\das\trees\transp\909\programm\
xp:
f:\programme\das\trees\transp\037\programm\wis_link
f:\programme\das\trees\transp\157\programm\wis_link
f:\programme\das\trees\transp\960\programm\
f:\programme\das\trees\transp\909\programm\
Don’t forget to backup the original files please.
EDIT:
When you update java, don’t forget to edit
xentry\bin\GlobalSystemSettings_install.properties.
For example: xdos 05-2017 version, here is the fix:
Xentry Help and DAS F6 Call WIS added fix for 2017-05.rar
Fix DAS F6 Call WIS is not available on this system ver 1_1.rar
Update:
it’s still valid for xdos 2018-12 with wis 2018-11. when you update java,
don’t forget to edit xentry\bin\GlobalSystemSettings_install.properties
The patch above is valid too for 03-2017 xdos version.
Hope this help.

How to recoverreset Xentry SD Connect C5

Xentry SD Connect C5 recovery… Here you go.
You can reset your Xentry Connect C5 multiplexer if your Xentry connect can not work well.
Make sure the Xentry connect is in Standby Mode!!!
You can shut down the Xentry Connect directly on the device via the menu (gearwheels button) or from the Xentry Control session

Please connect the driver and power supplyincludinged in delivery to your Xentry connect and to the drive.

Important: please note that both USB connectors must be attached for a successful update process and the devices supplied with power
Start update procedure: Power on the Xentry Connect with the keycombination<red cross> and <green check mark>

You’ll be prompted to insert the Xentry Connect update BD via a message on the display
Update procedure: The update procedure starts automatically. This will be indicated as follows on the display

Just wait till the steps finish.
Update complete: Xentry Connect indicates the update completion on the display.

You can complete the process by pressing the <green check mark> button. Or wait until Xentry Connect automatically shuts down (approx 10 min after the image appears in the display)
If necessary, install some patchs or add-ons after the Xentry Connect Recovery.

To ensure your system is up-to-date, please install the add-ons after completing the update
To do so, switch the Xentry Connect on and connect to the Xentry Connect via Xentry Control. You can start the “Updater” tool via the diagnosis deskshop.
The add-on download begins automatically
Wait until all add-ons have been installed. The status is displayed on the screen. Afterwards, you can use the Xentry Connect C5 normally. The update is then complete

Why choose Mercedes C5

First , see the fake Mercedes Benz C5: nothing update
Fake mb star c5 is another SDconnect c4 with a different look only
fake C5 adopts the same design in appearance as the genuine from French ACTIA Company
same sw, some PCB, same result
See the fake board from c5 mux, completely same as Mercedes BENZ C5
To buy a fake c5 is to have a c4 in hand.
But now, you have luck with a real Mercedes Benz C5.
Genuine Xentry Connect C5
1:1 clone of the original
This 1:1 clone of the original is the newest star diagnosis system in the year 2017.
Same as the one produced by French ACTIA Company, can test Engine /Transmission / air conditioning /SRS.ABS/ anti-theft system and OBD-II system.
New & Update:
1 This C5 is the real version with HQ PCB like the original, not the cheap onemade by SD connect PCB.
2 support the newest hybrid W222.
3 has an Ethernet switch, which switches the TCP/IP messages in the event of DoIP diagnosis to the vehicle side.
New PCB talks.
Top 7 Reasons To Get MB SD Connect C5:
1.Support Wireless
2.Software Version: 2019.09
3. Hardware Verison:  OS:2.3   CSD:2.11
4. Support Multi-languages: English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish & Chinese
5. Support Mercedes Benz Cars After Year 2000
6. The quality is the best and it can work stable.
7. Support Offline and Online Programming, If You Want to Do Online,you must have an account online.Buy This Online SCN Coding Service(RD94)
Softwares list:
1. DAS 2019.09: the automatically Diagnosis Assistance System
2. Xentry 2019.09: New software released by Bennz Company after 04/2009 by diagnosis new cars.
3. WIS net 2019.03:Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
4. EPC.net 2018.11:Electronic Parts Catalog
5. ST Finder:Part Location Finder options: 2008 and 2016
6. STARUTILITIES :the movement management system and self-test
7. SD MEDIA 2014
8. PL73: 2018 Mercedes software with PL73
9.Engineer Software：DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming
10.HHT Software for old cars
11. Engineer version Vediamo updated to V5.01.01,Engineer version DTS updated to V8.14.016，Upgrade to the latest version of 2019 data
1) Fix the error that Mercedes-Benz DAS cannot directly call WIS
2) Join the DAS sedan smart offline programming
3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo
4) Join DAS special function password-free access PKW and SMART
5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline
6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit
7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function
8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly
9）Add DAS 212，207 prototyp model